Get ready for the ultimate model printing experience.

No... seriously.. get ready, because this shouldn't be your first resin to ever print with.
It is an engineering resin and NOT for beginners. 

Having printed over a million models, we sought to make our own resin to meet our exact needs. 
We prioritized print quality above all, then durability, and finally cost. This is the result of years of testing and dialing in.  Want to know how good the qualtiy can be? Buy a mini and see for yourself.
 
Resin Characteristics:
Does not separate quickly when left untouched
Very viscous when under 25C
Ideal print temp minimum of 30C
Opaque color and dense pigmentation provides better control of curing zones avoiding soft or bloated look in fine details
No need to mix in anything else, just shake, open, and pour into your vat
Compatible with pixel pitch/size 5μm or larger
Provides durability without the headaches of overly elastic resins
 
Print Characteristics:
Ultra high fidelity and accurate detail
Durable through balance of strength and flex
Excellent for visualizing details without the need to prime
Durable enough to drill and tap for strong mechanical connection of parts
 
Bottle Characteristics:
Ribbed grip for your anti-slip pouring pleasure
Aluminum seal in every bottle top to retain freshness and avoid spills in transit
Sharp point on top side of cap for easy seal cutting without risk of cutting yourself
Bottle mouth design minimizes resin running down the side of bottle
Bottle mouth size is perfect for reusable metal filter
 
Warning: Never ingest or touch barehanded

Shake well before use and keep away from sunlight and other UV light sources

All 3D printers are different, even the same exact model printer will have varying power output from unit to unit. A printer's screen will also have hot spots and cool spots so make sure to dial in your settings to account for this. The following are just basic guidelines to you starter. YOU MUST do your own testing and fine tuning on YOUR specific printer.  Your ideal settings will be very different and vary by temperature and desired layer height. 

Absolute Minimum Printing Temp: 25C
Recommended Minimum Printing Temp: 30C
Layer Height: 50μm
Bottom Layers: 10
Bottom Exposure: 35s-45s
Normal Exposure: 3s-5s

Full Warning:
May cause skin or eye irritation. Keep away from childrenand animals. Wear proper eye protection, vapor ratedrespirator, and nitrile gloves when handling liquid andsemi cured resin. Not recommended for use around anyonepregnant or with respiratory illness. Only use in wellventilated environment. Thoroughly cure any waste andcheck your local government guidelines for disposal of anybyproduct or waste material. Thoroughly wash hands andface with cold water and soap after working with resin. Notfood safe, never ingest or inhale uncured resin.